World leader in production optimization solutions for flowing wells and all forms of artificial lift.
Red Eye™ 2G water cut meter
The Red Eye® 2G Water-Cut Meter uses a patented optical sensor technology to accurately measure the full range (0 to 100%) of oil and water concentration in a commingled stream. Its high accuracy across all water-cut levels and easy installation and configuration make this unique meter suitable for numerous applications.
The meter can be used alone to measure and report instantaneous water cut, in conjunction with a companion Net Oil Computer (NOC) to perform timed production well tests, or as part of the Red Eye Multiphase Metering System (REMMS).
- Unmatched accuracy
- Insensitive to entrained gas
- Ignores salinity and dissolved gas
- Easy installation, calibration, and service
Well Testing
The Red Eye 2G Water-Cut Meter is typically used downstream from a two phase test separator in the liquid leg. The meter can be combined with a total liquid flow meter and NOC for individual oil and water flow rates.
Individual Well Monitoring
The Red Eye 2G Water-Cut Meter can be used to monitor individual wells and provide continuous real-time, water-cut data. When streams contain free gas (up to 20% gas void fraction) the meter provides unsurpassed performance in accurate determination of oil and water rates.
Group Production at Centralized Facilities
The Red Eye 2G Water-Cut Meter can be used to monitor group production lines as well as individual test lines. The compact insertion style design is very cost effective even for large line sizes.
Dewatering Monitoring Systems for Crude Oil Tanks
When a Red Eye 2G Water-Cut Meter is installed on the discharge line from a tank, the operator can easily identify the rag layer (interface between the oil and water in the tank). The optical sensors of the meter sense very small amounts of oil in the rag layer as it passes through the pipe allowing the operator to shut off the flow from the tank.
Conductivity-type probes do not match the accuracy of the Red Eye 2G Water-Cut Meter because there is such a small difference between the rag layer and the water that floats it. The Red Eye 2G Water-Cut Meter allows water to be transferred with virtually no oil from the tank.