JST

Universal joint

A comprehensive range of couplings to suit the various outside diameters of pipes with nominal bores between DN 40 and DN 300 (e.g.: steel with ductile or cast iron, cast iron with asbestos cement, steel with PVC), no need for seal ring replacement. Pipes of diverse materials and outside diameters can be connected by one single joint, it considerably reduces supplies held in warehouse

• Perfect tightness even on piping with uneven surfaces.
• Easy to install
• Savings on installation costs thanks to quicker mounting times afforded by small-section excavations
• The high adhesion and impact resistance characteristics offered by the Rilsan coating of body and ring nuts eliminates the need for additional on-site coatings
• Maximum operating temperature: 70°C
• Maximum operating pressure: 16 bar
• Test pressure: 24 bar
• Tightening torque: 55÷65 Nm
• Maximum pipe axial movement allowed by seal distortion: 10 mm
• Maximum pipe angular aeflection: ±6 on each end of the joint, to absorb any ground settlement

All metal, rubber, and coatings used have been designed for contact with water for human consumption, pursuant to the terms of the Italian Health Ministry Decree no. 174 of 6/4/2004.

Flange adaptor

Universal joint with a flanged end and a coupling-type end on the opposite side, suitable for interconnecting a flanged pipe with a smooth-end pipe made of different material but with same rated diameter.

Flange adaptor designed to join pipes of various materials (e.g.: steel with ductile or cast iron, cast iron with asbestos cement, steel with PVC), and outside diameters to flanges of the same or different nominal bores, with no need to replace the seal ring. Pipes of different materials and outside diameters can be connected by one single joint, it considerably reduces supplies held in warehouse.

• Perfect tightness — even on pipes with uneven surfaces
• Easy to install
• Savings on installation costs thanks to quicker mounting times afforded by small-section excavations
• The high adhesion and impact resistance characteristics offered by the Rilsan coating of body and ring nuts eliminates the need for additional on-site coatings
• Maximum operating temperature: 70°C
• Maximum operating pressure: 16 bar
• Test pressure: 24 bar
• Tightening torque: 55÷65 Nm
• Unified UNI PN 10 and 16 flange drilling (UNI EN 1092-2)

All metal, rubber, and coatings used have been designed for contact with water for human consumption, pursuant to the terms of the Italian Health Ministry Decree no. 174 of 6/4/2004.

Model GS dismountling joint slip type

Three flange type, flange drilling according to UNI EN 1092-2 (other on request).

• Suitable for connection of every type of flanged pipes or special pieces
• Angular deflections of pipe are not allowed
• Maximum axial spacing during installation: ± 25 mm (s)
• High resistance to axial strength
• External coating blue RAL5005 epoxy paint or tar paint for underground application, 120 micron thickness. Hot-dip galvanization is an alternative. Others on request
• Larger diameters and higher pressure ratings are available on request