JST

Signalling tape

• Reduces the risk of damage caused by utility vehicles (excavators) interfering with lines or underground cables and causing flammable fluid leakage or brush discharge hazards
• Prescribed by D. M. 24/11/84 for use in the laying of gas distribution systems with operating pressure up to 4 bar (Class 4 pipes)
• To be placed 30/50 cm above pipe (after partial backfill)
• Ultimate elongation >150%
• Indelible inscription
• Age-resistant, soil bacteria-resistant, oil-proof, acid-proof, alkali-proof
• A clear PP coating film is heat-transferred onto the colour substrate film to protect inscription and improve the tape’s mechanical strength
• Customized inscriptions, colours and dimensions available on request

Net with signalling tape

• Tape is heat-transferred to the net
• Upon request, two stainless steel wires can be incorporated to allow the detection of plastic piping route using standard radio-wave detection equipment. The marker wires must be connected to the end of each roll by means of clips, welding, or plaited using suitable pliers. A potential measuring point is required every 500/1,000 m complete with clip.
• Reduces the risk of damage caused by utility vehicles (excavators) interfering with lines or underground cables and causing flammable fluid leakage or brush discharge hazards.
• Prescribed by D. M. 24/11/84 for use in the laying of gas distribution systems with operating pressure up to 4 bar (Class 4 pipes).
• To be placed about 50 cm above the extrados of the pipe or cable after partial backfilling. Unwind the roll along the excavation on a semi-compact bed, possibly free from projecting bumps. Carry out the final backfilling.
• Ultimate elongation lengthwise >600%.
• Lengthwise tensile strength: 600 N (for 50 cm widths)
• Protective PP film makes inscription indelible.
• Excellent resistance to micro-organisms, fungi, moulds.
• Customized inscriptions, colours and dimensions available on request.